About - all4 neoprene SBR fabrics sheets

About All4 Neoprene Fabrics Manufacturing Details

neoprene rubber is also called neoprene foam or neoprene sponge because it has cells in the middle that give it soft characteristics, which is not the same as solid rubber.
neoprene rubber foam’s hardness can be customized, to meet different applications. Soft-like garments, hard-like weighting belts, and neoprene rubber can all meet the requirements
of customizing required hardness neoprene rubber, the foaming procedures have a MOQ of 50pcs of neoprene raw bed, with a thickness of 50mm. So the customized neoprene rubber has a MOQ, but regular specifications do not.
Because in procedure #3 as the left shows, the neoprene beds are loosely connected with glue end to end, there is a possibility that these seams may break after laminating, but it will not influence the usage, so it’s not considered defective.
we’ll charge the dying cost for customized color fabric laminations, but for colors in the All4 Neoprene color chart, no extra fee.
We’ll cut a small hole in the tail to test the lamination firmness before shipping, which will not influence the whole piece’s size and usage, so it’s not considered defective.
The received rolled packages should not be put standing or cross-stack to avoid the neoprene sheets’ damage.
We suggest unrolling the packings after receiving the packages, and releasing the sheets in a flat ground for at least 24 hours, then can use them for specific applications.

our All4 Neoprene has stocks of 0-3 degrees, 9-11 degrees, 23-28 degrees, 30 degrees, Shore C, and tolerance ±3 degrees.
our neoprene sheets uniform size is 1.3 x 3.3 meters/pc, same as 51” x 130” /pc
neoprene rubber varies based on the materials, and we have 100%SBR, 15%CR, 30%CR, 50%CR, 80%CR,100%CR for customers to choose from. The higher the CR percentage is, the softer and higher the elasticity the neoprene sheet will be.
Nylon and polyester fabrics have enough color stock to choose from.

our regular packing is in rolls, like 6-12pcs/roll, depending on different thicknesses
package rolls will have an inner package of pp plastic, and an external package of weaving bags.
for extremely high thickness or high hardness products, we’ll stack them with plates and wrap them with pp plastics.